Is this what is needed? It isn't obvious what the thread size wants to be.
HD also carries a 1" version.
fwiw, Googling "Black Iron Side Outlet Tee" yields the richest set of hits. There are some larger thread sizes included...
Looks like the Bruins will be hitting the links as they could not stop the Panthers tonight, losing 2-1 in a hard played game to close the series out 4-2.
Good luck to Florida!
A 2.2K pull-up to 3.3V is only a 1.5ma source. ESP32 IO pins are rated up to 40ma each (of course you can't actually use them like that ;)) so 1.5ma is a walk in the park. Also, the DS2413 spec for the IO pull-up is 1.5K min/2.2K max so there isn't much range there.
If the ESP32 One-Wire driver...
fwiw, the DS2413 uses a "parasitic power" scheme which requires the host to be capable of same. The original version of BrewPi never supported parasitic powered ds18b20's and afaik none of the derivatives do, either, so I wonder if they could support the DS2413...
Cheers!
Now now. You should be happy I got rid of allll the port forwarding here, and use my NAS as a tunnel endpoint vectored through Synology.
And what I'm running in my brewery for taplist and chamber controls are the moral equivalent of toasters. And there's no need to replace a toaster unless the...
Finished cleaning ^those four carboys^ that I procrastinated over last night ;) Up-side: zero crusties remaining, so they cleaned up el rapido! Also I cleaned a keg I kicked last night...
Today I laid out our veggie garden with drip irrigation and landscape cloth and tomato stakes and pepper cages, and was seeing sheets of pollen being stirred out of the big oaks on the property. Fortunately I'm not allergic to pollen because I'm sure I inhaled plenty of it. My truck has turned...
Phil responded to the email I sent him regarding the hops he sent me and I learned he is a transplanted Kiwi. His company spent over $10K on the new bagger so he was hella keen to get my take on that :) He seems quite earnest and eager to square away the old baggage he acquired with the...
These arrived today from Northwest Hop Farms, sent by Phil Salisbury who is an owner of the company, as a demonstration of their new and greatly improved bag handling. They are quite properly vacuum sealed with no fewer than four heat-embossed seal lines, two each on either side of the bag cut...
I confess that reminds me of when my Micromatic stout faucet breeched its internal gasket resulting in a stout geyser that was only stopped by disconnecting the QD inside the keezer.
She only had a bottle to discharge. I had a five gallon keg :oops: