Recent content by KegLand

Yes that is the issue. Many customers use products like Oxyclean and some formulations of sodium percarbonate based cleaners but if this is the only ingredient they generally dont act on a wide range of soiling. If you use 100% sodium percarbonate for instance you end up with residue building...

Yes long term storage of Star San is no problem at all. The PET and POK and also all the rubbers we use have a high resistance to acid including lactic, acetic, LABS acid and phosphoric acid as well as many other acids. So you can keep these acids even in high concentration in the Oxebar kegs...

Just to be specific it's not so much the "sodium percarbonate" itself as this particular chemical is fine. The issues is that many of the formulations that use Sodium Percarbonate also use an additional agent called "sodium metasilicate". Sodium Metasilicate is the specific ingredient that is...

Thanks for that. We really appreciate the support. We are always looking for ways we can improve the product so we appreciate all feedback we can get from you guys.

It's important to understand what you are asking for. Different vessels are designed for different applications. For all our fermenters we make wide neck as our company philosophy is that a fermenter is something you should be able to get into and clean. With kegs you generally do not get...

We do already have distributors in America so it's best to go to: www.morebeer.com www.williamsbrewing.com

https://www.kegland.com.au/products/nukatap-mini-horizontal-clamp-on-assembly You might be better off using this clamp on tap assembly in the link above and then clamp the tap onto the door like this below:

In the latest update we have updated the network libraries that are used to connect the device to wifi. We still have some older stock in circulation with older network libraries that have more connectivity bugs. So now that the firmware is updates I think you will find future updates easier...

Yes I would tend to agree with this. The usage of a large 10inch filter housing does introduce some risk. For dark beers like stout or porters this some oxidation will not be very noticeable but for light flavored beers you will certainly have to manage this risk.

I personally use biofine but this really requires you to be able to crash chill so as long as you have glycol cooling or chamber to put your fermenter into this is the way to go. I also sometimes use this device to prevent a small amount of particles getting stuck in the draft system too...

We have to make sure we get replacement seals to the retailer and communicate that to them. In order for you to get the best customer service experience we would like to reach out to the retailer to make sure they have some replacement stock they have received free of charge. If you have...

Which retailer did you purchase the product from?

I would just contact your local retailer or point of purchase for these and then if you send some photos of the issue they will probably send a complete seal kit for free but that is between our American distributors and you as a customer.

I am not sure if this helps at all but the washers are slightly different. In the past we manufactured the Intertap taps with a nylon cup washer. Nylon is hard wearing but it's not as slipery and it also doesnt have quite as good chemical resistance especially when you are using highly acidic...

Great. Thanks for that clarification. Also even in the case of a leak the thread tape is probably not going to help this type of thread. As you can see from this type of thread design that was made by the ISBT: https://www.isbt.com/assets/Threadspecs/1165371-1_SHT1.pdf You can see the thread...