estricklin
Well-Known Member
I love this cheese because even after only aging for a couple of weeks, it has quite a bit of flavor. The process for making it, is basic cheesemaking techniques. You can adjust the pressing times to get a softer or harder cheese. I think next time I make it, I'll smoke some jalapenos, dice and add them to the curds before pressing.
I tried rennet tablets for the first time, so far so good.
![rennet.jpg rennet.jpg](https://cdn.homebrewtalk.com/data/attachments/717/717834-4e85c231b83890e2ad167203f03e527c.jpg)
After testing the curds, I cut and stir. During the stirring, I usually listen to an audio book, as 40 minutes of it can be kind of boring. I have an ancient candy thermometer, it's prefect for monitoring the temps vs. probing it from time to time.
![testing.jpg testing.jpg](https://cdn.homebrewtalk.com/data/attachments/717/717835-0dc24e70a368f7a4c5e58aae74f66be2.jpg)
![cutting.jpg cutting.jpg](https://cdn.homebrewtalk.com/data/attachments/717/717836-e9a3e48fcda850fc2b0bb71575e8efe2.jpg)
![stir.jpg stir.jpg](https://cdn.homebrewtalk.com/data/attachments/717/717837-f19912313e69b1cb18416aaed031f574.jpg)
Next I drain the curds, and mix in some salt. The curds go into a press with 8lbs of weight, for 6-8 hours.
![curds.jpg curds.jpg](https://cdn.homebrewtalk.com/data/attachments/717/717838-67e86f0606aadbb1022eff53fbe89e24.jpg)
![pressing.jpg pressing.jpg](https://cdn.homebrewtalk.com/data/attachments/717/717839-9b30c061129b21104f5533653235abf2.jpg)
After the pressing, the cheese needs to be rubbed with salt, and dried at room temp for 18-36 hours. I cover it with a bowl starting out to keep any pests away, and later
I will cover it with cheesecloth.
![drying.jpg drying.jpg](https://cdn.homebrewtalk.com/data/attachments/717/717840-ff3211c68a682228abfef9ba59c7bc6f.jpg)
![bowl.jpg bowl.jpg](https://cdn.homebrewtalk.com/data/attachments/717/717841-2024beb75a0e36ec11eac4cf63c21f54.jpg)
After drying I will place it into a ripening box for 2 weeks. Next I'll cut the wheel in half, and eat one half, while the other half ages for another 4 weeks or so.
Edit:
Here is the full recipe for anyone interested. It's very close to the Jack recipe in "Artisan Cheesemaking at Home".
1. I heated the milk up to 86F over the course of about 15-20 minutes.
2. Sprinkled enough starter culture, in this case MA4001, to inoculate 2 gallons of milk per the instructions. For the brand I have, that was about 1/8th tsp. I then let the starter rehydrate for a few minutes before stirring it in.
3. I let the milk ripen for 1 hour.
4. I added about 60 drops of annatto. Jack cheese is not usually yellow, but I wanted to mix it up. I added 1/2 tsp of calcium chloride, mixed into 1/4 cup of water. I added 1/2 crushed rennet tablet, to 1/4 cup of water. I added the rennet mixture to the milk, and stirred for 30-60 seconds.
5. I came back 45 mins later, and the curd was set pretty well, and I made sure it gave a nice clean break.
6. I cut the curds into 3/4 pieces, then let them heal for 5-10 minutes.
7. Over the course of 40 minutes, I stirred gently, and constantly, while raising the heat slowly from 86F to 102F. Next I left the curds to settle for 30 minutes. I then ladled off the excess whey.
8. I then stirred the curds for an additional 20 minutes.
9. Next I poured the curds and whey mixture into a colander lined with cheesecloth. I left them to drain for about 5-7 minutes. I added 1 tbsp of salt, and tossed the curds to mix. I then rolled the cheesecloth up and rolled the ball of curds around in the colander for a minute.
10. I put the cheesecloth with the curds in it, into a cheese mold, and pressed at 8 lbs for about 7 hours. After removing the cheese, I rubbed the cheese with 1 tbsp of salt. I left the cheese to air dry, flipping once every 12 hours.
I tried rennet tablets for the first time, so far so good.
![rennet.jpg rennet.jpg](https://cdn.homebrewtalk.com/data/attachments/717/717834-4e85c231b83890e2ad167203f03e527c.jpg)
After testing the curds, I cut and stir. During the stirring, I usually listen to an audio book, as 40 minutes of it can be kind of boring. I have an ancient candy thermometer, it's prefect for monitoring the temps vs. probing it from time to time.
![testing.jpg testing.jpg](https://cdn.homebrewtalk.com/data/attachments/717/717835-0dc24e70a368f7a4c5e58aae74f66be2.jpg)
![cutting.jpg cutting.jpg](https://cdn.homebrewtalk.com/data/attachments/717/717836-e9a3e48fcda850fc2b0bb71575e8efe2.jpg)
![stir.jpg stir.jpg](https://cdn.homebrewtalk.com/data/attachments/717/717837-f19912313e69b1cb18416aaed031f574.jpg)
Next I drain the curds, and mix in some salt. The curds go into a press with 8lbs of weight, for 6-8 hours.
![curds.jpg curds.jpg](https://cdn.homebrewtalk.com/data/attachments/717/717838-67e86f0606aadbb1022eff53fbe89e24.jpg)
![pressing.jpg pressing.jpg](https://cdn.homebrewtalk.com/data/attachments/717/717839-9b30c061129b21104f5533653235abf2.jpg)
After the pressing, the cheese needs to be rubbed with salt, and dried at room temp for 18-36 hours. I cover it with a bowl starting out to keep any pests away, and later
I will cover it with cheesecloth.
![drying.jpg drying.jpg](https://cdn.homebrewtalk.com/data/attachments/717/717840-ff3211c68a682228abfef9ba59c7bc6f.jpg)
![bowl.jpg bowl.jpg](https://cdn.homebrewtalk.com/data/attachments/717/717841-2024beb75a0e36ec11eac4cf63c21f54.jpg)
After drying I will place it into a ripening box for 2 weeks. Next I'll cut the wheel in half, and eat one half, while the other half ages for another 4 weeks or so.
Edit:
Here is the full recipe for anyone interested. It's very close to the Jack recipe in "Artisan Cheesemaking at Home".
1. I heated the milk up to 86F over the course of about 15-20 minutes.
2. Sprinkled enough starter culture, in this case MA4001, to inoculate 2 gallons of milk per the instructions. For the brand I have, that was about 1/8th tsp. I then let the starter rehydrate for a few minutes before stirring it in.
3. I let the milk ripen for 1 hour.
4. I added about 60 drops of annatto. Jack cheese is not usually yellow, but I wanted to mix it up. I added 1/2 tsp of calcium chloride, mixed into 1/4 cup of water. I added 1/2 crushed rennet tablet, to 1/4 cup of water. I added the rennet mixture to the milk, and stirred for 30-60 seconds.
5. I came back 45 mins later, and the curd was set pretty well, and I made sure it gave a nice clean break.
6. I cut the curds into 3/4 pieces, then let them heal for 5-10 minutes.
7. Over the course of 40 minutes, I stirred gently, and constantly, while raising the heat slowly from 86F to 102F. Next I left the curds to settle for 30 minutes. I then ladled off the excess whey.
8. I then stirred the curds for an additional 20 minutes.
9. Next I poured the curds and whey mixture into a colander lined with cheesecloth. I left them to drain for about 5-7 minutes. I added 1 tbsp of salt, and tossed the curds to mix. I then rolled the cheesecloth up and rolled the ball of curds around in the colander for a minute.
10. I put the cheesecloth with the curds in it, into a cheese mold, and pressed at 8 lbs for about 7 hours. After removing the cheese, I rubbed the cheese with 1 tbsp of salt. I left the cheese to air dry, flipping once every 12 hours.
Last edited: